OTOMATİK KONTROL SANAYİ A.Ş.
Tel: +90 216 385 63 32 Pbx  Fax: +90 216 363 28 46

ANA SAYFA HAKKIMIZDA ÜRÜNLER HABERLER REFERANSLAR İLETİŞİM
 

Amerikan menşeili Super System firması özellikle gaz analizi konusunda uzmanlaşmış olup, ürünleri tüm Türkiye genelinde firmamız tarafından pazarlanmaktadır.  Endüstriyel uygulamalarınız için 26" boyunda seramik Oksijen problarımız stoklarımız her zaman mevcuttur. Talepleriniz için firmamız ile irtibata geçiniz.
 

SuperOX 

Tav Fırınları ve Boyler Yakma Kontrolü için Oksijen Probları

SuperOX

Oxygen sensor for combustion control in re-heat furnaces, boilers and incinerators.

This in-situ oxygen sensor measures "%" oxygen concentrations directly in the combustion area of high temperature furnaces, boilers and incinerators. They are intrinsically safe, generating a very low millivolt output based on the oxygen content of the atmosphere.

  • Available in a number of standard lengths - 18"(457mm), 26"(660mm), 30"(762mm), and 36" (915 mm)
  • Available in both alumina and silicon carbide outer sheaths
  • Rapidly replacing older/outdated, non-current patented, non-rebuildable in situ oxygen sensors
  • Field performance can be collaborated using external "verification" port
  • "B", "S", and "R" thermocouples are available
  • Temperature Range: 1200 °F to 2900 °F (649-1550°C)
  • Cooling air maintains positive pressure to ensure the integrity of the electrical connections in HARSH environments
  • Outer electrode is not "painted" on the zirconia electrolyte, eliminating the antiquated "boot" design
  • Years of application experience maximizes sensor life and performance in high-slag, turbulent environments

Applications

Glass Melting - Glass Furnace / Ceramic Kilns Exhaust Stacks

HP 2000 Typical Installation sketchFeatures:

  • 24/7 monitoring of combustion stack oxygen
  • Interface with existing combustion control system
  • Low maintenance, NO calibration
  • Probe verification
  • Oxygen sensor is re-buildable
  • Optional "sample" dryer
  • Optional "sample" pump
  • Optional interface with ETHERNET
  • Optional interface with 4-20mA Damper Control

What does this do for you?

  • Gives you an input to control your air-fuel ratio
  • It will improve the QUALITY of the product
  • It will reduce maintanance costs
  • It will allow product consistency

typical installation

Stack monitoring with ethernet interface

Steel Reheat Furnaces

SSi has designed, developed and tested an in situ, high temperature oxygen sensor ideally suited for the typical steel reheat furnace. Measuring excess oxygen allows the control system to maintain an optimum level of oxygen, enough for combustion, reducing scale build-up and limiting the development of NOx.

SuperOX offers SuperOX offers:

  • Fuel Savings
  • Scale Control
  • Limits NOx Development

 

Steel Reheat Furnace

Process Heaters - Afterburners

Hydrocarbon Power Generation

 

Copyright © 2004 - 2008 OKSAN